Early Bird Racing
Welcome to Early Bird Racing.
Use your iRacing name when you register.
After you Register, I'll send an iRacing invite.
Next Race
New Hampshire Motor Speedway
September 23, 2017
Camping World Truck Series

League Video
Other Leagues

iRacing ingame scanner

View previous topic View next topic Go down

iRacing ingame scanner

Post by James A Tyler on March 17th 2015, 8:31 pm

For those who want to know. I got this from the iRacing help section.


Text and voice chat within the simulation have been replaced with a race radio. The new radio is a
combination scanner and transmitter.

The scanner will automatically scan through all of the channels that are programmed into the radio. The
scanner can have up to 32 channels.

The transmitter will be set to transmit on one of these channels. Any text chat or voice transmissions you
make will be on the channel the transmitter is set to. You can assign a key or button to the "Next
Channel"/"Previous Channel" controls on the Options/Sound screen. You can use these controls to cycle the

transmitter through the set of channels that are programmed into the radio. The channel your transmitter is
set to is displayed on the replay and driving screens, above the L/Q/S/P meters. The transmitter-channel
indicator will blink each time your radio's configuration is changed.

A channel is identified by its name. Channel names begin with the @ symbol, and can include letters, digits,
and the - (dash) symbol. Channel names are converted to all upper case letters, and so they are not case
sensitive. Channel names can be up to 15 letters long, including the leading @ symbol.

Channels have levels of permission. Only a certain set of people are permitted to talk on a channel, and a
different set of people are permitted to scan (listen to) the channel. If you are not permitted to talk on a
particular channel, it will be skipped when you cycle your transmitter to the next/previous channel.

There are some predefined channel names:

@ADMIN - Anyone that has admin privileges on the server can scan and talk on this channel. This channel is
intended to allow server admins to talk among themselves, without others on the server listening in.

@RACECONTROL - People with admin privileges on the server can talk on this channel. Everyone on the
server will scan this channel. It is intended as a way for the server admins to communicate with everyone on
the server at once ("I'm going to throw a competition-caution on lap 30").

@DRIVERS - This is roughly the equivalent of the "old" radio. All drivers can scan and talk on this channel.

@SPECTATORS - Anyone can scan and talk on this channel, but it is only pre-programmed into the radio for
spectators. Spectators can now text and voice chat among themselves, without interrupting the drivers.
There are some predefined channel names that actually map to many distinct channels internally:

@CLUB - There will be a separate channel for each club. Drivers can only scan and talk on their own club's

@TEAM - Each team will have its own channel. Only people that connect to the server as part of your team
can scan and talk on your team channel.

@PRIVATE - Each person that connects to the server will have their own private channel. You must scan
your own private channel. Private text chat messages are sent to you on your @PRIVATE channel. Anyone
can private text chat to you, and only server admins can voice chat to you.

Server admins can always scan and talk on any channel, provided they know the channel name.

Your radio will come pre-configured with a particular set of channels, depending on how you registered for
the server, and your rights on the server:

- If you are a driver in the session you will scan the @DRIVERS, @TEAM, @CLUB, @RACECONTROL, and your own @PRIVATE channels. 

- If you are a spotter for a driver in the session, you will scan the @TEAM, @RACECONTROL, and your own
@PRIVATE channels.

- If you are a spectator you will scan the @SPECTATORS, @RACECONTROL, and your own @PRIVATE

- All server admins will scan the @ADMIN channel. 

Since it would be difficult to understand what is being said if several people talk at the same time on different
channels, you will only hear one person speaking at a time. The radio channels have priorities. Your radio will
automatically silence someone speaking on one channel if someone starts speaking on a higher-priority
channel. For example, if you are hearing someone speak on @DRIVERS and one of your teammates starts
talking on your @TEAM channel, your teammate's message will take priority. Channels are ordered as
follows, from highest to lowest priority:


You can also create your own channel and add it to your radio (see the @add command, below). If you give
the name of this channel to others, they can also add the channel to their radios, and you can then all talk to
each other. Just be aware that anyone that knows (or guesses) your channel name can add the channel to
their radio and or join the conversation (or just listen in).

In addition to the next/prev channel controls, some text chat commands exist that can be used to alter your
radio. You enter these commands as if you were going to transmit a text chat message. You can enter these
commands no matter what channel your transmitter is set to - the commands are intercepted and acted on
without actually being transmitted. These commands are signaled by starting your text chat message with the
@ symbol.

Will list the radio commands.

@help cmd (for exmample @help list)
Will give you more information about a specific command. 

Will list the set of channels that are programmed into your radio. Each channel will be preceded by up to 4
letters, indicating some properties about the channel.
"s" means that the channel is being scanned by your radio's scanner.
"t" means that you can transmit on this channel.
"m" means that you have muted this channel.
"a" identifies the channel your transmitter is set to (the "active" channel).

Will add the specified channel name to your radio, and switch your transmitter to that channel. For this and all
the other radio chat commands where you specify a channel name, you can include the @ on the name
(@add @lizard), or not (@add lizard). Both will work.

Will remove the specified channel from your radio. Some channels can not be removed.

Will switch your transmitter to the channel. If you do not have permission to transmit on the channel, the
transmitter will not be changed. 

Will mute the channel. You will no longer see any text chat, or hear any voice chat sent on the channel. Some
channels can not be muted.

Cancels muting on the specified channel.

Turns off scanning for any channels on your radio that you are allowed to mute. Some channels, like
@RACECONTROL, can not be muted, and will still be scanned.

Turns scanning back on.
None of the changes made to your radio using the chat commands are "sticky". They are forgotten each time
you exit the simulation.
James A Tyler

Posts : 175
Points : 1679
Reputation : 53
Join date : 2014-03-30
Location : Las Vegas


Back to top Go down

View previous topic View next topic Back to top

Permissions in this forum:
You cannot reply to topics in this forum
 2013-2020 EarlyBirdRacing.com